PL3 RM-Li 6000VA 10000VA Rack Mounted Online UPS with 51.2V 12Ah 18Ah 24Ah LiFePO4 Batteries

A high-density rack-mounted online UPS featuring double-conversion topology and lithium battery integration, delivering reliable and efficient power protection for critical IT and industrial applications.

brand:
EverExceed
Model:
PL3 RM-Li
Type:
Rack mounted
Rated voltage:
220/230/240VCA
Rated frequency:
40-70Hz
Efficiency:
Up to 98%
Applications:
Critical Infrastructure & IT Systems
Rated capacity:
6000VA 10000VA

inquiry now

6000VA 10000VA Rack mounted Online UPS with Lithium-ion Battery

Protection for Servers and Networking Equipment

High Performance

Intelligent Lithium Integration

 Integrated Modbus (RS485) communication with lithium BMS enables:

 Accurate battery monitoring (Voltage / SOC / SOH)

 Coordinated UPS-battery operation

 Backup time pred

Wide Input Compatibility

 Ultra-wide input frequency range: 40–70Hz

 Adaptive output frequency: 50/60Hz

 Wide input voltage range for unstable grid environments

Advanced 3-Level Topology

 Higher efficiency

 Reduced energy consumption

 Improved performance stability

Superior Load Capability

 Strong load adaptability

 Supports half-wave and nonlinear loads

Digital Intelligence

 Full digital control technology

 High-performance DSP processor

 High input and output power factor

Ultra-Compact High Power Density

 10kW in just 2U rack space

 Ideal for space-limited data rooms

Superior Lithium battery technology

Safe and reliable: Adopts Grade A LiFePO4 batteries and built-in smart BMS.

Fast recharge: Twice as fast as traditional VRLA batteries getting you back to 90% in as little as 2 hours.

More discharge cycles: Deliver up to 10 times more charge / discharge cycles than VRLA batteries.

Fewer battery replacement: Last on average up to 3 times as long as traditional VRLA batteries reducing maintenance cost.

6kVA/10kVA

Model		PL3 RM6KL-Li	PL3 RM10KL-Li
Capacity		6kVA/6kW	10kVA/10kW
Topology		True Online Double Conversion
Phase Type		Single Phase Input / Single Phase Output
Cold Start		Yes
Input Voltage Range		110–288VAC (220/230/240VAC) 176–288VAC without derating 110–176VAC with linear derating from 50%–100%
Input Power Factor		≥0.99
Input Frequency Range		40-70Hz
Output Frequency		50/60Hz(Auto-sensing)
Output Power Factor		1
Output Voltage		220/230/240VAC
Output Voltage Regulation		±1%
Dynamic Response		≤5% (0%-100%-0%)
Recovery Time		≤40ms (0%-100%-0%)
THD		≤ 1% (Linear Load) ≤ 5% (Non-linear Load)
Transfer Time	Normal - INV	0ms
	INV-Bypass	0ms
Crest Factor		3:01
Battery Voltage		Standard 192VDC Optional 240VDC
Backup Time		Depends on external battery capacity
Max. Charging Current		8A(Adjustable)
Efficiency		95.5%（Conversion efficiency）
		98%（ECO）
Overload Capacity	Main Mode	105%-110%: switch to bypass after 60 min; 111%-125%: switch to bypass after 10 min; 126%-150%: switch to bypass after 30 sec
	Bypass Mode	<125%: normal; 126%-130%: shutdown after 5 min; 131%-150%: shutdown after 1 min; >150%: shutdown after 200 ms
Communication Interface		RS232、RS485（standard）
Optional Accessories		SNMP card, parallel kit, 12A charger, USB (Type-B), built-in maintenance bypass, dry contact board
Noise		<58dB @ 1m
Relative Humidity		0-98%（non-condensing）
Operating Temperature		-10~50℃
LED		Input voltage, frequency, load level, operation mode, health status, battery SOC
Dimensions（WDH）mm		44058086
Weight(KG)		11KG	13KG

If you need to download files, you need to register as our member first ! log in / registered

PL3 RM6~10KVA-Li Online UPS with Li-ion Battery V1.0 2026.03.18.pdf

Datasheet1
Datasheet2

1. How long is the backup time?

Backup time depends on the load and battery configuration. Typical systems can provide backup ranging from 15 minutes to several hours. Customizable battery capacity is available to meet specific needs.

2. Can the lithium battery be replaced or expanded?

Yes. The battery pack is modular and supports easy maintenance, replacement, or expansion based on power requirements.

3. Does it support remote monitoring?

Yes. The system integrates BMS (Battery Management System) and supports Modbus/RS485, allowing remote monitoring of SOC (State of Charge), SOH (State of Health), voltage, current, and temperature.

4. Is it compatible with generators and solar panels?

Yes. The UPS is compatible with both diesel generators and solar power systems, making it suitable for hybrid power scenarios.

5. How long is the product warranty?

Our standard warranty is 5 years, depending on the configuration. Extended warranty and service support are available upon request.

6. What safety protections are included?

Overcharge / Overdischarge protection

Overtemperature and short-circuit protection

Intelligent BMS protection

Fire-retardant housing and conformal coating

7. Can it be customized for different voltages or form factors?

Yes. We offer a wide range of customization options—including input/output voltage, battery capacity, communication interfaces, cabinet design, and integration with automation or energy systems.

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

subject :PL3 RM-Li 6000VA 10000VA Rack Mounted Online UPS with 51.2V 12Ah 18Ah 24Ah LiFePO4 Batteries

tags :

Related products

EverExceed | Empower, Energize, Exceed the Energy you Expect forever;

UL Certified 512V 25.6kWh / 51.2kWh UPS Lithium Battery System – High Voltage Backup for Critical Loads

EverExceed high voltage LiFePO4 (lithium iron phosphate) battery is a new environment-friendly backup power module specially designed for UPS power systems. With an advanced life span, extra compact size, very lightweight, and strong environmental working conditions, besides indoor, it is also the ideal solution for the outdoor harsh environment found in the field, where the UPS are installed and used.

6-10kVA PL3 RM High Frequency Online UPS

6kVA/ 10kVA rack mounted UPS, 208/220/230/240 VAC, 1:1 PL3 RM series power supply adopts online double conversion design and digital control technology and it features high input and output power factor, self-adaptive output frequency according to input frequency, intelligent battery management and excellent network management.

12.8V 100Ah 1.3kWh LiFePO4 Battery Pack with Built-in BMS for RVs

EverExceed LDP Series Lithium Iron Phosphate (LiFePO4) batteries are perfect for RV applications, offering maintenance-free operation for a hassle-free experience. Inherently safe and lightweight, the batteries ensure consistent and reliable performance, allowing you to enjoy uninterrupted power and peace of mind during your RV adventures.

12.8V Server Rack Battery | UPS Lithium-ion Battery

EverExceed’s 12.8V Server Rack Battery is a high-performance, space-efficient solution engineered to meet the evolving needs of modern UPS systems. Designed for seamless integration with tower-mounted UPS, rack-mounted UPS, specialized UPS, and EPS systems, this lithium-ion battery offers reliable backup power for a wide range of critical applications. Ideal for small businesses and compact systems requiring up to 3.0kWh, it delivers consistent performance, safety, and long service life — making it the smart choice for today’s power backup demands.