| General Specifications of PowerGuiding Series UPS |
| Model |
PG8 |
PG10 |
PG12 |
PG15 |
PG20 |
PG30 |
PG40 |
PG50 |
PG60 |
| Power Rating(KVA) |
8 |
10 |
12 |
15 |
20 |
30 |
40 |
50 |
60 |
| Input |
Voltage |
208/380/400/415VAC±20% 3wires+N+G |
| Frequency |
50Hz±10% or 60Hz±5% |
| Power Factor |
0.95(with Input Filter) |
| Soft Start |
0~100% 5sec. |
| Control Mode |
MOSFET & IGBT PWM |
| Max. current(A) |
20 |
25 |
28 |
33 |
40 |
50 |
57 |
60 |
65 |
| Bypass |
Voltage |
120VAC or 220VAC±15% L+N+G |
220VAC±15% |
| Frequency |
50/60Hz±2% |
50Hz±2% |
| Battery |
DC Voltage |
192/384VDC(12V Battery,32Units) |
| Floating Charge Voltage |
216/432VDC |
| Low limit Voltage |
168/336VDC |
| Max.Discharge Current(A) |
19 |
25 |
30 |
38 |
51 |
76 |
90 |
115 |
140 |
| Charge Current |
10A~25A(configurable) |
| Output |
Voltage |
220VAC±1% (steady load)L+N+G |
| Frequency |
50Hz±5% (utility power mode) 50Hz±0.05% (battery mode) |
| Waveform |
Sine wave |
| Total Harmonic Distortion |
<3% at linear load ; <5% at nonlinear load |
| Power Factor |
0.8(lagging) |
| Overload Capability |
<125% for 10min ; <150% for 1min ; >150% for 200ms |
| System Instructions |
Efficiency |
>91% |
>95% |
| Transfer Time |
0 ms |
| Communication Interface |
RS232/RS422 |
| Operating Temperature |
0~40℃ |
| Relative Humidity |
0~90% noncondensing |
| Audible Noise |
≤50dB at 1meter |
≤55dB at 1meter |
≤60dB at 1meter |
| Physical |
Dimension(W×D×H)mm |
1140×560×800 |
| Weight(kg) |
200 |
210 |
188 |
258 |
310 |
380 |
430 |
540 |
490 |
| Remark |
Product specifications are subject to change without further notice. |